Hallo zusammen,
meine BTTV878-Karte läuft auf Anhieb von der Livedisk, wenn ich bei der HD-Install jedoch meine Graka mit dem Nvidia-Script installiert habe, läuft weder das Konfigurationsscript noch XAWTV.
dmesg | grep bttv:
Code:
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 185, latency: 32, mmio: 0xdddfe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom indicates model#37284
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .<6>ts: Compaq touchscreen protocol output
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
/usr/bin/configure_bttv (KOnfiguration im Kanotix-Menu gibt ein Fenster mit der Usage für X-Dialog aus.
XAWTV sagt folgendes:
Code:
This is xawtv-3.95, running on Linux/i686 (2.6.18-kanotix-1)
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 137 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 67
Current serial number in output stream: 67
Kann mir jemand sagen, wo es hakt bzw was ich so alles probieren kann?
Gruss
Dyo[/quote] |
